What is a Heat Pump Water Heater?
Heat pump water heaters absorb warmth from the air and transfer it to heat water. Hence they are also referred to as ‘air-source heat pumps’. They operate on electricity but are roughly three times more efficient than a conventional electric water heater. When used in the right environment they save energy, save money and reduce greenhouse gas emissions.
If you are considering buying a Heat Pump Water Heater or are interested in more information, download our Heat Pump Water Heater household guide.
How does a Heat Pump Hot Water service work
A heat pump hot water service works on the same principle as a refrigerator, but instead of pumping heat out of the fridge to keep it cool, they pump heat into the water. Electricity is used to pump a refrigerant through the system. The refrigerant transfers the heat absorbed through the air to the water in the tank.
Diagram 1. Workings of a heat pump
Heat pumps work through the use of a refrigerant that evaporates at low temperatures.
There are several steps in the process:
- A liquid refrigerant passes through an evaporator where it picks up heat from the air and becomes a gas.
- The gas refrigerant is compressed in an electric compressor. Compressing the gas causes its temperature to increase so that it becomes hotter than the water in the tank.
- The hot gas flows into a condenser, where it passes its heat to the water and turns back into a liquid.
- The liquid refrigerant then flows into an expansion valve where its pressure is reduced, allowing it to cool and enter the evaporator to repeat the cycle.
A heat pump uses electricity to drive the compressor and the fan instead, unlike a traditional electric resistance water heater that uses electricity to directly heat the water. The heat pump is able to transfer a much greater amount of heat energy from the surrounding air to the water, which makes it highly efficient. The amount of heat that is able to be transferred from the air to water depends on the ambient temperature.
While the outside temperature is higher than the cold refrigerant, the heat pump will absorb heat and move it to the water. The warmer the outside air, the easier it is for the heat pump to provide hot water. As the outside temperature decreases, less heat can transferred, which is why some heat pumps don’t work as well in places where temperatures are low.
In order for the evaporator to allow heat to be absorbed continuously, there needs to be a constant supply of fresh air. A fan is used to assist air flow and remove the cooled air.
Heat pumps are available in two configurations; integrated/compact systems, and split systems.
- Integrated/compact systems: the compressor and the storage tank are a single unit.
- Split systems: the tank and the compressor are separate, like a split system air conditioner.
This information is an extract form http://www.energyrating.gov.au/products/water-heaters/heat-pump-water-heaters